Colloidal Silver Generator
Our Super Zapper (Bio-electric Stimulator) has an output and attachments for making colloidal silver. Various forms of silver salts in solution were used as germ fighters in the early 1900s. Prior to the introduction of antibiotics, silver was already proven to be effective at killing germs, yet relatively harmless and non-toxic to humans. The silver compounds if used for long periods would produce a grey stain on the skin. Since the early 1980s, silver once again began to emerge as a useful anti-infective agent. In 1988, a report from the UCLA School of Medicine showed silver solution's effectiveness against a wide variety of pathogens, including staphylococcus aureas, streptococcus species saslmonella, and fungi such as candida species. Most antibiotics will target particular types of bacteria whereas silver is reported to kill over 600 strains. With increasing "super bugs" resistant to almost all antibiotics, it is reassuring to know colloidal silver will still work.
Today's silver is known as "colloidal" meaning there is a fine atomic-level suspension of silver particles, instead of a crude compound silver solution. The silver is much more easily absorbed and operates at the cellular level in our body. Also, colloidal silver is safe and non-toxic, even at relatively high concentrations, and can be used for long time periods.
The Super Zapper/Beck Silver Pulser makes colloidal silver by the process of electrolysis. Two silver electrodes are hung over a glass tumbler full of purified water. Current passes from the electrodes through the water, leaving a fine trace of silver colloid. Independent laboratory testing has revealed our silver to be 10 parts per million after only five minutes production. (In a weakly conductive filtered water - the process takes longer if using distilled water).
It is a powerful and safe anti-microbial liquid. It costs a few cents to make a glassful of colloidal silver with the Beck Silver Pulser. The liquid is taken internally on a daily basis and is also effective applied externally to cuts and abrasions. Making your own colloidal silver is far cheaper than buying from a supplier. Commercially produced colloidal silver is made with a small amount of preservatives in order to stabilize the solution and guarantee it's shelf life.
Disclaimer: The information given is for experimental and educational purposes only and no medical claims are made or implied. Bettalife4U accepts no responsibility for any ill-effects or otherwise as a result of the use of devices or application of information and statements made on this website. The opinions, conclusions expressed in these pages are Bettalife's alone, unless otherwise stated or quoted.
Make your own Colloidal Silver for a fraction of the cost
of commercially available bottled Colloidal Silver!
- The CSG1 Colloidal Silver Generator operates on one nine-volt battery producing a twenty-seven volt output. The output is constant current and constant voltage regardless of battery voltage. This means you get a consistent colloidal silver every time.
- The CSG1 includes a battery low indicator so you know when the battery is exhausted and needs replacing.
- Comes complete with 2 silver rod electrodes (99.99% pure silver), electrode holder and comprehensive instructions.
Measures 90x67x27 mm.- Easy to use, convenient, battery operated and totally portable.
Colloidal Silver has powerful natural anti-bacterial, anti-viral, anti-fungal and anti-parasite effects.
Various forms of silver salts in solution were used as germ fighters in the early 1900s. Prior to the introduction of antibiotics, silver was already proven to be effective at killing germs, yet relatively harmless and non-toxic to humans. The silver compounds if used for long periods would produce a grey stain on the skin.
Since the early 1980s, silver once again began to emerge as a useful anti-infective agent. In 1988, a report from the UCLA School of Medicine showed silver solution's effectiveness against a wide variety of pathogens, including staphylococcus aureas, streptococcus species salmonella, and fungi such as candida species. Most antibiotics will target particular types of bacteria whereas silver is reported to kill over 600 strains. With increasing "super bugs" resistant to almost all antibiotics, it is reassuring to know colloidal silver will still work.
Today's silver is known as "colloidal" meaning there is a fine atomic-level suspension of silver particles, instead of a crude chemical compound silver solution. Colloidal silver consists of millions of microscopic silver particles electrically charged and suspended in water. The silver is much more easily absorbed and operates at the cellular level in our body. Also, colloidal silver is safe and non-toxic, even at relatively high concentrations, and can be used for long time periods.
Colloidal silver works by having a positive electrical charge which when in the presence of an infective agent disrupts the normal cellular function causing death or weakening of the organism. This process is so effective that no pathogen has been recorded to mutate against colloidal silver, or live in its presence for more than six minutes.
We make colloidal silver by the process of electrolysis. Two silver rod electrodes are suspended in a glass tumbler full of pure distilled water. Rain water or filtered water may also be used, but the resulting solution will not be pure distilled colloidal silver as other ions and chemicals present in the water will react to produce other compounds. Current passes from the electrodes through the water, leaving a fine trace of silver colloid. In a weakly conductive filtered water it only takes 3 - 5 minutes to have a concentration of 5 ppm in 200mls - the process takes longer if using distilled water, which is the best and safest way.
Distilled water is readily and cheaply available from garages and supermarkets. Don't use spring water as it is too high in minerals. It is a powerful and safe anti-microbial liquid.
It costs you just a few cents to make a glassful of colloidal silver.
The liquid may be taken internally on a daily basis and is also effective applied externally to cuts and abrasions. Making your own colloidal silver is far cheaper than buying from a supplier.
Commercially produced colloidal silver is made with a small amount of preservatives in order to stabilize the solution and guarantee shelf life.
10 to 40 mls of 10 ppm colloidal silver per day for acute conditions and maintenance.
20 to 100 mls of 5 ppm colloidal silver per day. In infections/flu consume between 50 and 200 mls daily. Use it for teeth/gum problems, wounds and burns externally as well as drinking it.
I have consumed a glassful (200mls or 8oz) of 5 ppm colloidal silver daily for several weeks with no ill effects.
Using the CSG1 takes between 25-35 minutes or longer to produce 10 ppm colloidal silver in 200 mls pure distilled water at room temperature (20°C).
5 ppm takes approximately 20 minutes for the same volume of water.
Figure on 10 minutes per 100mls of pure distilled water, after the solution has become conductive, or when you first notice silver/grey wisps coming off of one of the electrodes. As noted above, using purified or filtered water the process is much quicker as the water already contains inorganic mineral compounds in minute amounts enough to produce a weak conductivity. Using distilled water guarantees the purest colloidal silver solution, and the best results.
See the instructions for more details.
ONLY NZ$99!
Click on the PayPal button to order:
Or CLICK HERE for our ordering page.
Disclaimer: The information given is for experimental and educational purposes only and no medical claims are made or implied. Bettalife4U accepts no responsibility for any ill-effects or otherwise as a result of the use of devices or application of information and statements made on this website. The opinions, conclusions expressed in these pages are Bettalife's alone, unless otherwise stated or quoted.